Using the Platform section
The Platform section displays the platform devices. These are system devices that are not controlled by OPOS or JavaPOS software. The Platform section may provide some configuration information or other information about the device.
Platform Devices
The following are the devices that are not controlled by OPOS or JavaPOS:
•Audio
•Audio volume
•Diagnostics button tests Stereo, Left, or Right Speaker
•BIOS
•BIOS Information
•BIOS Version
•BIOS Release Date
•BIOS Vendor
•BIOS ROM Size
•BIOS OEM String
•System Information
•NCR Class & Model
•NCR Serial Number
•Manufacturer
•Motherboard ID
•Disks—provides information for each drive in the system
•Disk Information
•Number of Physical Disks
•Physical Drive 0 Size
•Number of Logical Disks
•Logical A Type (for each drive in the system)
•Logical C Type
•Logical C Total Size
•Logical C Free Space
•Logical D Type
•SMART drive information where available.
•Diagnostics button is used to select the drive to display that drive’s properties.
•Display (legacy systems, 7610, and 7611 terminals)
•Panel Type
•Brightness
•Contrast
•Screen Blank Delay
•Memory (if licensed)
•Physical Memory
•Available Memory
•Memory Usage
•Page File Size
•Available Page File Size
•Motherboard
•NCR Class & Model
•NCR Serial Number
•Manufacturer
•Manufacturer ID
•Processor
•System–wide CPU Usage
•Hardware Monitor Information
•Processor Temperature
•System Temperature
•Processor Fan
•Various Voltages (based on terminal type)
•Network
•Computer Name
•Number of Adapters
•Adapter 1 MAC Address (for each adapter)
•Adapter 1 IP Address (for each adapter)
•TCP and UDP port usage
•Diagnostics button is used to test Ethernet or WaveLAN communications. If hardware specific diagnostics are not available for the network adapter, selecting Ethernet brings up the Control Panel so that you can check the Network Connections.
•Operating System (if licensed)
•Version
•Build
•Service pack
•Hot fixes
•User Name
•System Drive
•System Root
•WinDir
•Temp
•OS
•Path
•ClassPath
•OS Image
•NCR Part Number
•NCR LPIN
•NCR Version
•Power States (For more information, refer to Configuring Power States)
•Serial Ports—identifies the COM Ports attached to the system.
•Diagnostics button is used to select a COM port, and then a turnaround test is performed if a turnaround plug is installed on that port.
•Software (if licensed)—lists the software installed on the system.
•Touchscreen
•Controller
•Diagnostics button is used to test a touch screen.
•UPS (only if installed with custom install)
•Versioning—version numbers for the modules in the following categories:
•RSM Version
•Common
•Common Kernel Drivers
•Common Libraries
•Common IO Libraries
•Common OSAL Libraries
•Common Utilities
•Platform
•Platform Agents
•Platform HAL
•Platform Kernel Drivers
•Platform Libraries
•Retail Controls
•JavaPOS Retail Controls
•Retail Control Models
•OPOS Retail Controls
•RSM
For more information about using the Platform section, refer to the following sections:
